Wesnoth 1.5.0
Moderator: Forum Moderators
Wesnoth 1.5.0
Wesnoth 1.5.0 is out!
This is the first release of the 1.5.x development branch. That means it may include a bigger amount of bugs than the 1.4.x branch and each version is not compatible with another one from the 1.4.x and 1.5.x branch since we do change quite a lot between the releases. Keep in mind, it might be a lot more buggy than the 1.4.x branch so don't be disappointed if you get a crash every now and then. "Normal" players should not use this release, you should stay with the stable branch. But if you want to test the future of Wesnoth, you are free to check 1.5.0.
The release includes many engine changes like the basics of formula AI which will eventually give content creators simple access even to advanced AI parameters. Beside that there were quite many other changes, too. The savegames from the 1.4.x line will probably not be compatible with 1.5.0 and usermade content from 1.4.x is likely to cause problems, too. Please uninstall your old version of Wesnoth and remove your userdata before installing the 1.5.0 release.
Some more important things to mention:
New (heavy) map-screenshot: The new map-screenshot feature (Hotkey : "Map Screenshot") may create heavy BMP image for big maps, so if you have limited diskspace, it's better to dezoom before using it.
Smarter pathfinding: Pathfinding now tries to avoid terrains with bad defense or to be blocked by friends (this help multi-turns moves).
Notes for packagers and those who build themselves:
* We now depend on boost_regex >= 1.33.0
* We now depend on libsdl-ttf >= 2.0.8
* We now depend on zlib >= 1.0 (with development files)
A first prototype implementation of the possible new buildsystem we might be using (scons) is done, too. Please test if it does work for your system as expected. Have a look at the INSTALL file or ask either esr or loonycyborg in IRC for more information about it. The old way building (configure && make && make install) should still work, but any upcoming bugs in it are likely not to be fixed.
Beside that there were many changes "under the hood" which you will probably not notice (at least when everything works as expected). Of course there is also the full changelog listing (almost) all the changes since 1.4. A changelog with changes that might be visible to most users (and only includes these) is the players changelog.
Downloads
Sources:
http://downloads.sourceforge.net/wesnot ... 2?download (143.1 MB) md5sum
Here is the xDelta for the sources:
http://downloads.sourceforge.net/wesnot ... a?download (1.4.1 to 1.5.0, 9.4 MB)
Check http://www.wesnoth.org/forum/viewtopic.php?t=7034 for info on using xdelta.
The Windows binary is not available yet. Once it is, you can find it on the download page.
The MacOSX binary is not available yet. Once it is, you can find it on the download page.
The OpenSolaris binary is already available. You can find it on the download page.
All known packagers have been contacted. Information about where to get the respective binaries or how to get them work you get on the Linux binaries site for the Linux binaries. Download links for the other supported systems will be listed at the downloads page once the binaries are available.
As a fallback you can also get the sources from http://files.wesnoth.org/ - you should first try to get files through SourceForge to help us save bandwidth.
The multiplayer server for 1.5.0 is already up and running. This server can only be used to play with 1.5.0. If you do encounter problems, please report them.
A new add-on server for the new development branch was started, too. If you encounter any problems with content from the add-on server not working as expected, please notify the content's author, most of them should be here in the forums.
If you find any bugs don't hesitate to report them, but please read the instructions on how to post bugs first. Instructions for bug reporting can be found at http://www.wesnoth.org/wiki/ReportingBugs.
Enjoy!
PS: Within the next seven days anyone asking when the binary for xyz will be ready will be banned and the post will be deleted. Such questions just distract the developers and packagers and don't do any good, so better not ask them...
Bugreports in the forums tend to get forgotten. You will get better results by following the guidelines and report them in the bugtracker.
This is the first release of the 1.5.x development branch. That means it may include a bigger amount of bugs than the 1.4.x branch and each version is not compatible with another one from the 1.4.x and 1.5.x branch since we do change quite a lot between the releases. Keep in mind, it might be a lot more buggy than the 1.4.x branch so don't be disappointed if you get a crash every now and then. "Normal" players should not use this release, you should stay with the stable branch. But if you want to test the future of Wesnoth, you are free to check 1.5.0.
The release includes many engine changes like the basics of formula AI which will eventually give content creators simple access even to advanced AI parameters. Beside that there were quite many other changes, too. The savegames from the 1.4.x line will probably not be compatible with 1.5.0 and usermade content from 1.4.x is likely to cause problems, too. Please uninstall your old version of Wesnoth and remove your userdata before installing the 1.5.0 release.
Some more important things to mention:
New (heavy) map-screenshot: The new map-screenshot feature (Hotkey : "Map Screenshot") may create heavy BMP image for big maps, so if you have limited diskspace, it's better to dezoom before using it.
Smarter pathfinding: Pathfinding now tries to avoid terrains with bad defense or to be blocked by friends (this help multi-turns moves).
Notes for packagers and those who build themselves:
* We now depend on boost_regex >= 1.33.0
* We now depend on libsdl-ttf >= 2.0.8
* We now depend on zlib >= 1.0 (with development files)
A first prototype implementation of the possible new buildsystem we might be using (scons) is done, too. Please test if it does work for your system as expected. Have a look at the INSTALL file or ask either esr or loonycyborg in IRC for more information about it. The old way building (configure && make && make install) should still work, but any upcoming bugs in it are likely not to be fixed.
Beside that there were many changes "under the hood" which you will probably not notice (at least when everything works as expected). Of course there is also the full changelog listing (almost) all the changes since 1.4. A changelog with changes that might be visible to most users (and only includes these) is the players changelog.
Downloads
Sources:
http://downloads.sourceforge.net/wesnot ... 2?download (143.1 MB) md5sum
Here is the xDelta for the sources:
http://downloads.sourceforge.net/wesnot ... a?download (1.4.1 to 1.5.0, 9.4 MB)
Check http://www.wesnoth.org/forum/viewtopic.php?t=7034 for info on using xdelta.
The Windows binary is not available yet. Once it is, you can find it on the download page.
The MacOSX binary is not available yet. Once it is, you can find it on the download page.
The OpenSolaris binary is already available. You can find it on the download page.
All known packagers have been contacted. Information about where to get the respective binaries or how to get them work you get on the Linux binaries site for the Linux binaries. Download links for the other supported systems will be listed at the downloads page once the binaries are available.
As a fallback you can also get the sources from http://files.wesnoth.org/ - you should first try to get files through SourceForge to help us save bandwidth.
The multiplayer server for 1.5.0 is already up and running. This server can only be used to play with 1.5.0. If you do encounter problems, please report them.
A new add-on server for the new development branch was started, too. If you encounter any problems with content from the add-on server not working as expected, please notify the content's author, most of them should be here in the forums.
If you find any bugs don't hesitate to report them, but please read the instructions on how to post bugs first. Instructions for bug reporting can be found at http://www.wesnoth.org/wiki/ReportingBugs.
Enjoy!
PS: Within the next seven days anyone asking when the binary for xyz will be ready will be banned and the post will be deleted. Such questions just distract the developers and packagers and don't do any good, so better not ask them...
Bugreports in the forums tend to get forgotten. You will get better results by following the guidelines and report them in the bugtracker.
Re: Wesnoth 1.5.0
Note about the scenario A New Land: you may experience OOS errors which happen when you first do an undoable move, then trigger a build/terraform or research menu and cancel it.
A fix is available in the attached two files. Replace your Wesnoth/data/multiplayer/scenarios/ANL_utils/ANL_research_options.cfg and ANL_worker_options.cfg with them.
A fix is available in the attached two files. Replace your Wesnoth/data/multiplayer/scenarios/ANL_utils/ANL_research_options.cfg and ANL_worker_options.cfg with them.
- Attachments
-
ANL_worker_options.cfg
- (10.13 KiB) Downloaded 694 times
-
ANL_research_options.cfg
- (9.1 KiB) Downloaded 678 times
Re: Wesnoth 1.5.0
A totally useless question:
How come the 1.1 lines started with 1.1.0, and the 1.5 lines started with 1.5.0, but the 1.3 line started with 1.3.1?
How come the 1.1 lines started with 1.1.0, and the 1.5 lines started with 1.5.0, but the 1.3 line started with 1.3.1?
Re: Wesnoth 1.5.0
IIRC, 1.3.0 was tagged and prepped for release, but a bug was discovered that made it completely unplayable, so a release announcement was never posted and no binaries were ever made.Chris NS wrote:How come the 1.1 lines started with 1.1.0, and the 1.5 lines started with 1.5.0, but the 1.3 line started with 1.3.1?
For I am Turin Turambar - Master of Doom, by doom mastered. On permanent Wesbreak. Will not respond to private messages. Sorry!
And I hate stupid people.
The World of Orbivm
And I hate stupid people.
The World of Orbivm
Re: Wesnoth 1.5.0
And why 1.4 lines started with 1.4 and not with 1.4.0?
Re: Wesnoth 1.5.0
Lovely! Have been waiting for this for a while. ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
Why did the fish laugh? Because the sea weed.
-
- Posts: 2
- Joined: April 25th, 2008, 7:17 pm
- Location: Germany
Re: Wesnoth 1.5.0
The question is maybe useless, but it's interesting.Chris NS wrote:A totally useless question:
How come the 1.1 lines started with 1.1.0, and the 1.5 lines started with 1.5.0, but the 1.3 line started with 1.3.1?
![Pensive :hmm:](./images/smilies/icon_pensive.gif)
Re: Wesnoth 1.5.0
In the news page you write complete changelog twice, but one of them directs in the players changelog.
Just notifying![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Just notifying
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Greek mantainer
Re: Wesnoth 1.5.0
Ups, fixed.konsnos wrote:In the news page you write complete changelog twice, but one of them directs in the players changelog.
Just notifying
Because stable releases just start with 1.Version where development releases start with the .0. That is just the way we/I do it... (And a 1.4.0 looks strange in the announcement, 1.4 looks better, this is no issue for a development release.)stikonas wrote:And why 1.4 lines started with 1.4 and not with 1.4.0?
Re: Wesnoth 1.5.0
Ubuntu 8.04 + wesnoth 1.5.0a + SCons
I have libsdl1.2-dev installed (I believe it's version 1.2.13), and SCons is throwing up:
Anyone getting SCons to work? I hate autotools and would love to abandon it as much as possible.
Update:
I figured it out. I needed libboost-iostreams-dev. SCons output above was very very misleading![Smile :)](./images/smilies/icon_smile.gif)
I have libsdl1.2-dev installed (I believe it's version 1.2.13), and SCons is throwing up:
Code: Select all
$ sudo scons
scons: Reading SConscript files ...
Saved options: debug = True
Checking for Boost iostreams library version >= 1.33.0... yes
Checking for Simple DirectMedia Layer library version >= 1.2.7... no
Base prerequisites are not met.
$
Update:
I figured it out. I needed libboost-iostreams-dev. SCons output above was very very misleading
![Smile :)](./images/smilies/icon_smile.gif)
- loonycyborg
- Windows Packager
- Posts: 295
- Joined: April 1st, 2008, 4:45 pm
- Location: Russia/Moscow
Re: Wesnoth 1.5.0
Was g++ pulled by libboost-iostreams-dev as dependency? SCons handles the absence of g++ very poorly, even causing spurious successes of boost checks(as I discovered by booting from Ubuntu liveCD)..risek123 wrote: I figured it out. I needed libboost-iostreams-dev. SCons output above was very very misleading![]()
"meh." - zookeeper
-
- Retired Developer
- Posts: 1086
- Joined: September 16th, 2005, 5:44 am
- Location: Hamburg, Germany
Re: Wesnoth 1.5.0
windows binaries are ready:
http://downloads.sourceforge.net/wesnot ... e?download
Again, like already provided with 1.4.1, we offer a couple of architecture optimized builds (see the 1.4.1 announcement for details).
@Anym:
I found your proposals about the 1.4.1 release very helpful and tried to incorporate them as good as possible into this release.
@tsr:
Haven't put your development release icon in yet, since it is still under work (but will do so once it is finished).
Last but not least the editor has a new icon (and hopefully they are shown correct this time
).
http://downloads.sourceforge.net/wesnot ... e?download
Again, like already provided with 1.4.1, we offer a couple of architecture optimized builds (see the 1.4.1 announcement for details).
@Anym:
I found your proposals about the 1.4.1 release very helpful and tried to incorporate them as good as possible into this release.
@tsr:
Haven't put your development release icon in yet, since it is still under work (but will do so once it is finished).
Last but not least the editor has a new icon (and hopefully they are shown correct this time
![Wink :wink:](./images/smilies/icon_wink.gif)
Smart persons learn out of their mistakes, wise persons learn out of others mistakes!
Re: Wesnoth 1.5.0
Offtopic: Now we only have to wait until SourceForge works again and we can give 1.5.0 a try. Slashdot, freshmeat and thinkgeek are down too. Looks like some major network issues over there. - All back after 5 hours of downtime.
Wesnoth 1.5.0 on Windows Vista (P4 architecture on core 2 duo CPU)
Installation: successful
Game vs CPU: successful
New map editor icon: works
Crashes:
When leaving an ANL game "wesnoth_p4.exe has stopped working" - This does not happen when ending any other map (reported)
When trying to run multiplayer server or multiplayers (safe mode): "Wesnoth_p4.exe has stopped working" (reported)
Wesnoth 1.5.0 on Windows Vista (P4 architecture on core 2 duo CPU)
Installation: successful
Game vs CPU: successful
New map editor icon: works
Crashes:
When leaving an ANL game "wesnoth_p4.exe has stopped working" - This does not happen when ending any other map (reported)
When trying to run multiplayer server or multiplayers (safe mode): "Wesnoth_p4.exe has stopped working" (reported)
Last edited by nataS on April 30th, 2008, 7:35 pm, edited 4 times in total.
Re: Wesnoth 1.5.0
But the problem he talked about still exists (Pic. 1). XP numbers are practically not visible.Yogi Bear wrote: @Anym:
I found your proposals about the 1.4.1 release very helpful and tried to incorporate them as good as possible into this release.
And another problem appeared, BTW (pic.2) (but that should be the common bug, not of Windows version).
Yes, they are.Last but not least the editor has a new icon (and hopefully they are shown correct this time).
Re: Wesnoth 1.5.0
If someone compiles the macOS vers. I will download it...
I tried compiling the source once - it resulted in me having no clue what I was doing![Smile :)](./images/smilies/icon_smile.gif)
P.S. It's been two weeks so I think I'm all right in asking what's up. Is anyone working on it?![Confused :?](./images/smilies/icon_confused.gif)
I tried compiling the source once - it resulted in me having no clue what I was doing
![Smile :)](./images/smilies/icon_smile.gif)
P.S. It's been two weeks so I think I'm all right in asking what's up. Is anyone working on it?
![Confused :?](./images/smilies/icon_confused.gif)
I'm tired.